Smart EVEMS panel for MURBs with 40A INPUT and 4X40A OUTPUT

$4,250.00

How It Works:

The EVectriX smart panel oversees all outputs and utilizes advanced logic, considering factors like usage patterns, the overall number of connected EV chargers, the status of EV batteries, and the queued power distribution. It can enable or disable connected EV chargers based on this smart analysis.

WARNING :

  • The EVETRIX panels MUST be installed and commissioned by a certified electrician based on National and Local Electrical codes otherwise the spare warranty will be voided.
  • EvectriX panels operate at 40 amp or 50 amp, 208/240 VAC, which poses a significant electrical hazard. Always exercise extreme caution and follow proper safety protocols during installation. Hazard Voltage. Will cause severe injury or death.
  • Before installation, ensure that the power supply to the charging system is completely shut off. Verify the absence of voltage using suitable testing equipment before starting any work.
  • Cease utilization of the Panel promptly in the event of any defects, cracks, breakages, or damages. Under no circumstances should you attempt to alter, repair, or disassemble the EVETRIX panel. Kindly reach out to the manufacturer in case of any malfunctions or issues.
  • Avoid installing the EVETRIX panel near flammable materials, explosives, fuels, chemical products, and vapors. Refrain from utilizing any cleaning solvents to clean the panel.
  • Ensure that the control panel is properly grounded according to local electrical codes and regulations.
  • Provide adequate ventilation for the control panel to prevent overheating. Avoid installing panels in enclosed spaces or near heat sources. During operation, it is essential to keep the panel door securely closed.
  • Adhere strictly to the manufacturer’s installation guidelines for wiring, ensuring correct wire gauge, proper grounding, and appropriate circuit protection to handle the high voltage requirements.
  • Implement appropriate isolation mechanisms, such as lockout/tagout procedures, to prevent accidental energization of the system during installation or maintenance.
  • Encourage periodic inspections by certified electricians to identify any potential issues or wear and tear, ensuring the safe and efficient operation of the EV charging system.

Description

NEX-1/4-40A is an Electric Vehicle Energy Management System(EVEMS) Smart Panel, capable of handling up to 4 EV Charger at 32 A each, can be operated in either a standalone configuration or a network-enabled mode.

Additional information

Weight 20 kg
Dimensions 40 × 40 × 20 cm
SPECIFICATION

INPUT: 1x50A 208/240 VAC
CONTROL VOLTAGE: 24 VDC 2A
WORKING TEMPERATURE:-20°C to +40°C
STORAGE TEMPERATURE: -20°C TO +40°C
OUTPUT: 4x50A 208/240 VAC
ENCLOSURE TYPE: NEMA 3R
WORKING RELATIVE HUMIDITY: ≤90%
STORAGE RELATIVE HUMIDITY: ≤93%